6-47Printing Environment Settings6SETUP Menu SettingsNETWORK MENU■ TCP/IP SETTINGSIP MODE...............................MANUAL*, AUTOPROTOCOL*1DHCP..................................OFF*, ONBOOTP ...............................OFF*, ONRARP..................................OFF*, ONIP SETTINGSIP ADDRESS ......................0.0.0.0*SUBNET MASK ..................0.0.0.0*GATEWAY ADDRESS ........0.0.0.0*DNSPRIMARY ADD. ..................0.0.0.0*SECONDARY ADD. ............0.0.0.0*WINS ....................................OFF*, ONARP/PING.............................ON*, OFFFTPFTP PRINT .........................ON*, OFFFTP SETTINGS ..................ON*, OFFLPD PRINT ...........................ON*, OFFRAW PRINT..........................ON*, OFFIPP PRINT ............................ON*, OFFHTTP ....................................ON*, OFFSNTP ....................................OFF*, ONRESPONSE..........................ON*, OFFIP ADD.RANGEREJECT RX/PRT................OFF*, ONREJECT ADD.SET.*2 ..........REJ IP 1 to 8PERMIT RX/PRT ................OFF*, ONPERMIT ADD.SET.*2 ..........PER IP 1 to 8REJ SET/BROWSE ............OFF*, ONREJECT ADD.SET.*2 ..........REJ IP 1 to 8PMT SET/BROWSE ...........OFF*, ONPERMIT ADD.SET.*2 ..........PER IP 1 to 8MAC ADDRESS SETPERMIT RECEIVE .............OFF*, ONPERMIT ADD.SET.*2 ..........PER.MAC ADD.1 to 50*1 PROTOCOL is displayed only when IP MODE is set to AUTO.*2 REJECT ADD.SET. and PERMIT ADD.SET. are displayed only when REJECT RX/PRT, PERMIT RX/PRT, REJ SET/BROWSE, PMT SET/BROWSE, or PERMIT RECEIVE is set to ON.Specifies the TCP/IP setting for the print server equipped with this printer.IMPORTANTAfter changing the settings for this item, cycle the power of the printer or perform ahard reset to make the settings effective.
