xiLegal NoticesModel NameThe following names may be provided for the safety regulations in each salesregion of this Laser Beam Printer.110 - 127 V model: L11184A220 - 240 V model: L11184EEMC Directive (220 - 240 V model)"This equipment has been tested in a typical system to comply with the technicalrequirements of EMC Directive."• Use of shielded cable is necessary to comply with the technical requirements ofEMC Directive.The product is in conformity with the EMC directive at nominal mains input 230 V,50 Hz although the rated input of the product is 220 - 240 V, 50/60 Hz.C-tick marking on the rating label means that we declare the product is inconformity with the relevant requirements at nominal mains input 230 V, 50 Hzalthough the rated input of the product is 220 - 240 V, 50/60 Hz.Laser SafetyThis product complies with 21 CFR Chapter 1 Subchapter J as a Class I laserproduct under the U.S. Department of Health and Human Services (DHHS)Radiation Performance Standard according to the Radiation Control for Health andSafety Act of 1968. Also, this product is certified as a Class 1 laser product underIEC60825-1:1993 and EN60825-1:1994. This means that the product does notproduce hazardous laser radiation.Since radiation emitted inside the product is completely confined within protectivehousings and external covers, the laser beam cannot escape from the machineduring any phase of user operation. Do not remove protective housings or externalcovers, except as directed by the equipment's manuals.
