|
4-33Loading and Outputting Paper4Printing from the Paper Cassette3 Select CASSETTE(n) SIZE (n = 1, 2) using [ ] and [ ], thenpress [OK].4 Select the paper size using [ ] and [ ], then press [OK]."=" is displayed on the left of the paper size, and the paper size for the papercassette is specified.Next, specify the paper type of the paper cassette (See the next item).Specifying the Type of the Paper in the Paper CassetteWhen you loaded paper in the paper cassette, specify CASSETTE(n) TYPE (n = 1,2) according the paper type using the control panel. The printer applies theappropriate print mode to the paper type. The default value is PLAIN PAPER.*1 Specify when you want to give a gloss to plain paper (75 to 105 g/m2 ) to be printed.*2 Specify when a paper jam occurs or when you want to improve the fixation on printing coarse paper (75 to 105 g/m2 )with PLAIN PAPER selected.IMPORTANT• Match the paper type specified in the SETUP menu of the printer and that specified in theprinter driver. If they do not match, the message appears. In thiscase, the setting for CASSETTE(n) TYPE (n = 1, 2) is changed to that in the printer driverby pressing the (Online) key, allowing you to continue printing.• If the type of the paper practically loaded in the paper cassette and the setting forCASSETTE(n) TYPE (n = 1, 2) do not match, this may result in crucial damage to theengine. Be sure to match the paper type.Paper Type SETUP MenuSetting for CASSETTE(n) TYPE (n = 1, 2)Plain paper (60 - 105 g/m2 )PLAIN PAPERPLAIN PAPER H*1ROUGH PAPER*2CASSETTE1 SIZE →=A4 →B5 →=B5 →
|
