2-41Installing the Printer2Turning the Printer ON and Checking the Printer OperationChanging the Language Used in the DisplayThe default value of the language used in the display is [ENGLISH].You can change the display language to [FRENCH], [GERMAN], [ITALIAN], or[SPANISH] using the following procedure.1 Press the (Settings) key.2 Select CONTROL MENU using [ ] and [ ], then press [OK].Nothing is printed on thepaper.Multiple sheets of paperwere fed at a time.Align the paper stack in thepaper cassette ormulti-purpose tray properlyand load it again. If you areusing transparencies, coatedpaper, or labels, fan themthoroughly and load themagain.The toner cartridge wasinstalled with the sealingtape still attached.Take the toner cartridge outof the printer, pull out thesealing tape, and reinstall thetoner cartridge.The (Message) indicatoris on and a message isdisplayed in the display.Some problem has occurred. See "Message List" (p. 8-33)and solve the problem.Symptom Cause RemedySETUPCONTROL MENU →POWER SAVE MODE→CONTROL MENU →
