4-14Loading and Outputting PaperPaper Source4NOTE• CASSETTE 2 is displayed only when the paper feeder is installed.• If paper of the same size is loaded in two or more paper sources when the papersource setting is specified to be selected automatically, paper is fed from the upperpaper source regardless of the status of the paper source indicators. When thepaper source runs out of paper, the paper source automatically switches to otherone in which paper of the same size is loaded.Precautions for Handling the Multi-purpose Tray or PaperCassetteBe careful of the following points when handling the multi-purpose tray or papercassette.IMPORTANT• Do not pull out the paper cassette while the printer is printing. This may result in paperjams or damage to the printer.• Do not touch the paper in the multi-purpose tray or pull it out during printing. This mayresult in a faulty operation.• Refill the paper cassette after all the loaded paper runs out. If the cassette is refilledwhen paper still remains in the cassette, it may result in misfeeds.• Do not put anything other than the printing paper on the multi-purpose tray. Also, do notpress on top of or apply excessive force to the multi-purposes tray. This may result indamage to the multi-purpose tray.• Do not touch the black rubber pad (A) in the paper cassette. This may result in misfeeds.• If you are printing from the multi-purpose tray or Cassette 2, make sure that Cassette 1 isset before printing. If you print from the multi-purpose tray or Cassette 2 when Cassette 1is not set, this will cause paper jams.NOTERemove the paper loaded in the multi-purpose tray before closing it. Keep themulti-purpose tray closed when it is not used.Cassette 1 Cassette 2(A) (A)
