8-48 Service Call DisplayTroubleshooting8Service Call DisplayWhen a problem has occurred and the printer does not work properly, the servicecall shown in the figure appears:1 Turn the printer and the computer OFF, wait for 10 seconds orlonger, and then turn it ON again.If the message does not reappear, the printer can be used as normal. If the errormessage still appears, proceed to the next step.Message Cause Remedy("n" represents anumber)A problem hasoccurred inside theprinter.Cycle the power of the printer using thefollowing procedure. If the message does notdisappear after cycling the power of the printerseveral times, contact your local authorizedCanon dealer.("n" represents anumber)A problem hasoccurred with thefixing unit of theprinter.Perform the following procedures from theStep 2 to contact your local authorized Canondealer.("n" represents anumber)A problem hasoccurred while theprinter isprocessing printdata.Cycle the power of the printer using thefollowing procedure.Ennn-nnnnE001-nnnnE003-nnnnF9-nn PWR OFF>ONONOFF
