6-27Printing Environment Settings6SETUP Menu SettingsSTD PAPER TYPEPLAIN PAPER*, PLAIN PAPER H, HEAVY PAPER 1, HEAVY PAPER 2, HEAVYPAPER 3, TRANSPARENCIES, ENVELOPE, COATED PAPER, LABEL, ROUGHPAPERSpecifies the default paper type. This printer internally applies the optimum printmode for the paper type specified in this item.Each print mode supports the following paper types.• PLAIN PAPER: Plain Paper (60 - 105 g/m2 )• PLAIN PAPER H: Specify when you want to give a gloss to plain paper (75 -105 g/m2 ) to be printed.• HEAVY PAPER 1: Heavy Paper (106 - 120 g/m2 )• HEAVY PAPER 2: Heavy Paper (121 - 176 g/m2 )• HEAVY PAPER 3: It is not recommended to print on heavy paper that weighsbetween 177 and 220 g/m2 . However, specify if you haveto perform printing.• TRANSPARENCIES: Transparencies (Black and white printing only)• ENVELOPE: Envelopes• COATED PAPER: Coated Paper (105 - 120 g/m2 )• LABEL: Labels• ROUGH PAPER: Specify when a paper jam occurs or when you want toimprove the fixation on printing coarse paper (75 - 105 g/m2 ) with PLAIN PAPER selected.IMPORTANT• When printing from Windows or Macintosh, specify the paper type in the printerdriver. When you want to print from a computer in which an operating system suchas MS-DOS and UNIX is used and cannot specify the paper type, specify the papertype in this item.• When printing coated paper of 121 - 160 g/m2 , set STD PAPER TYPE to COATEDPAPER, and then set COATED PAPER in SP.PRINT MODE in the USER MAIN.options to ON.TRAY PAPER TYPEPLAIN PAPER*, PLAIN PAPER H, HEAVY PAPER 1, HEAVY PAPER 2, HEAVYPAPER 3, TRANSPARENCIES, ENVELOPE, COATED PAPER, LABEL, ROUGHPAPER, MIXED TYPESSpecifies the type of the paper to be loaded in the multi-purpose tray. This printerinternally applies the optimum print mode for the paper type specified in this item.Each print mode supports the following paper types.• PLAIN PAPER: Plain Paper (60 - 105 g/m2 )
