3-2 Power Saving (Power Save Mode)Using the Printer3Power Saving (Power Save Mode)You can reduce power consumption efficiently by using POWER SAVE MODEwhen the printer is idle or not in use.There are the following two kinds of Power Save Mode.IMPORTANTEven if the power switch is turned OFF, power is consumed only slightly while the powerplug is inserted into the AC power outlet. To cut the power consumption completely,unplug the power plug from the AC power outlet.NOTE• The (Job) indicator is on while a job is being stored into a box even if the printer is inPower Save Mode (The printer can store jobs into the boxes only when a hard disk isinstalled in the printer).• You can release Power Save Mode by setting TIMER SETTINGS to WAKE UP TIME(See p. 6-18).• To configure the printer so that it does not enter Power Save Mode, set POWER SAVEMODE (See p. 6-13) to OFF.• To configure the printer so that it does not enter Power Save Mode when an error isoccurring in the printer (when the (Message) indicator is on, or the number in themessage blinks), set PWR SAVE IN ERR (See p. 6-14) to OFF.
