7-21Adjusting the Printing Position7Routine MaintenanceAdjusting the Printing PositionIf the printing position is skewed when printing from a certain paper source, you canadjust the position from the control panel.IMPORTANTIf any part of the print image lies outside the printable area after adjusting the printingposition, the part will be missing in the print result.NOTEBe aware that, when adjusting the printing position for 2-sided printing, the orientation ofthe images on the reverse pages varies depending on the printing orientation or settingfor BIND.LOCATION.Checking the Printing PositionPerform the Printing Position Adjustment Print and check the position and directionto be adjusted.IMPORTANTWhen adjusting the printing position for 2-sided printing, set 2-SIDED PRINT. (See p.6-30) to ON previously.1 Press the (Feeder Selection) key.2 Select PAPER SOURCE using [ ] and [ ], then press [OK].SELECT FEEDERPAPER SOURCE →PAPER SOURCE →=AUTO →
