6-40Printing Environment Settings6SETUP Menu SettingsCMS■ CMS SELECTIONPRINTER*, HOSTSpecifies which device the printer or host (the printer driver) is to be used for colorprocessing.If PRINTER is specified, the color processing is performed on the printer.If HOST is specified, the color processing is not performed on the printer.IMPORTANT• If the setting for CMS (Matching) on the host (the printer driver) is set to [DriverMatching Mode], the setting for this item is ignored even if PRINTER is specified,the host performs the color correction process.• If HOST is specified for this item, the host that is not connected via the printerdriver does not perform the color correction process.■ CMS/GAMMATEXT .................................... CMS*, GAMMAGRAPHICS .......................... CMS*, GAMMAIMAGE.................................. CMS*, GAMMASpecifies whether to perform color matching or correct color specifying thegamma value.You can specify the settings by data type of TEXT, GRAPHICS, and IMAGE.If you change the setting for this item, availabilities of the following settings switch.: Enabled X: DisabledCMS GAMMARGB SRCE PROF. (See the nextitem) XOUTPUT PROFILE (See p. 6-42) XMATCHING METHOD (See p. 6-42) XGAMMA (See p. 6-43) X
