Turning the Printer ON and Checking the Printer Operation2-40Installing the Printer2When the Printer Does Not Operate ProperlyIf the printer does not operate even after turning it ON or print Configuration PagePrint properly, the following causes are conceivable.Symptom Cause RemedyThe printer cannot be turnedON.The power plug is unpluggedfrom the AC power outlet.Plug the power plug into theAC power outlet.There is a break in the powercord.If the printer is turned ONafter replacing the powercord with the one that is ofthe same type and is usedfor other device, there is abreak in the power cord. Inthis case, purchase a newpower cord and replace itwith the broken one.The indicators on the controlpanel do not come on.The printer is not ON. Turn the printer ON.The printer is in Power SaveMode.The printer will be ready toprint after you send print dataor press any key on thecontrol panel.The printer does not operate.The printer is offline.Press the (Online) key toturn on the (Online)indicator.The interface cable isdisconnected.Connect the interface cablefirmly to the interfaceconnectors on the computerand printer unit.A paper jam occurs eachtime you print.The amount of the paperloaded in the paper cassetteor multi-purpose trayexceeds the load limitation.Reduce the amount of paperto within the load limitationand print again.Paper is not loaded properlyin the paper cassette ormulti-purpose tray.Load the paper properly andprint again.Unusable paper is loaded inthe paper cassette ormulti-purpose tray.Replace the paper with onethat can be used and printagain.There is still jammed paperinside the printer.Remove any jammed paperand print again.
