Connecting the Cables2-34Installing the Printer2Using a Printer CableIf the printer port of the computer you are using is a parallel interface (IEEE1284compatible), use a printer cable that matches the connector of the computer.CAUTIONBefore connecting the network cable to the printer, be sure to turn the printerOFF, and then unplug the power plug from the AC power outlet. Failure toobserve these steps may result in an electrical shock.1 Connect the centronics 36 pin connector of the printer cableto the parallel connector on the printer a, and then secure thefastening pins b.2 Connect the other end of the printer cable to the printer porton the computer.● Installing the SoftwareAfter connecting the printer cable, install the software for this printer. For moredetails, see "Driver Guide".abb
