6-15Printing Environment Settings6SETUP Menu SettingsNOTE• If <16 CHG."color" TNR> appears, and the printer stops printing, replace the tonercartridge, and then print again.• If STOP PRINTING is specified for this item, the message <16 PREP."color" TNR>changes to <16 CHG."color" TNR>, and the printer stops printing.AUTO ERROR SKIPOFF*, ONSpecifies whether the printer should automatically use the function that, when anerror has occurred, releases the printer from the error temporarily (Error Skip) andcontinues the job.If OFF is specified, you need to skip the error by pressing the (Online) key.If is ON is specified, the printer skips the error automatically without you pressingthe (Online) key.NOTE• The Error Skip function is only for skipping an error temporarily. Therefore, the datamay not be printed properly.• For the types of error from which the printer can be released temporarily, see"Message List," on p. 8-33.• If ON is specified for this item, the printer automatically skips all the errors it canskip automatically even when multiple errors are occurring.PANEL LANGUAGEENGLISH*, FRENCH, GERMAN, ITALIAN, SPANISHConfirm the language that is displayed in the display.SHOW WARNINGSCHECK TONER ....................ON*, OFFCASSETTE EMPTY .............ON*, OFFA Warning status is a status in which the printer requires some remedy althoughthe job is not affected. When the printer is in this status, a message appears in thedisplay, or an indicator blinks.This item allows you to specify whether a message should appear or any indicatorshould blink when the printer is in any of the following Warning status.
