4-5Loading and Outputting Paper4Paper Requirements■ Coated PaperThis printer can print coated paper. Coated paper is to be loaded in the multi-purpose tray.Also, coated paper at a size of A4, Legal, Letter, or Foolscap that weighs between 105and 120 g/m2 is available for automatic 2-sided printing.■ EnvelopeThe envelopes that can be used with this printer are as follows.* You cannot use envelopes at sizes of DL, COM 10, Monarch, and C5 that have a flap on the short edge.IMPORTANT• Do not use the following types of envelopes. Using inappropriate envelopes may result inpaper jams that are difficult to clear or may result in damage to the printer.- Envelopes with fasteners or snaps- Envelopes with address windows- Envelopes with adhesive on the surface- Wrinkled or creased envelopes- Poorly manufactured envelopes in which the glued parts are uneven- Irregularly-shaped envelopes• Before loading the envelopes, flatten the stack of envelopes to release any remaining air,and press the fold lines along the edges tight.• Do not print on the reverse side (glued side) of envelopes.Envelope DL(110.0 mm x 220.0 mm)Envelope COM10(104.7 mm x 241.3 mm)Envelope C5(162.0 mm x 229.0 mm)Envelope Monarch(98.4 mm x 190.5 mm)Envelope B5(176.0 mm x 250.0 mm)
