3-11Printing/Saving Jobs (Only When the Hard Disk Is Installed)Using the Printer39 Select a number using [ ] and [ ], then move a digit using[ ] and [ ].Repeat this operation to enter the password.NOTE• Only numbers can be entered from the control panel.• Depending on the version of the encrypted secured print driver, you can specifyalphabetic characters and marks for passwords. Print an encrypted secured printjob from the Remote UI if the password contains any alphabetic characters ormarks (See Remote UI Guide).10 After entering the specified password, press [OK].The specified file is printed. If you enter a wrong password, the entered passworddisappears. In this case, re-enter the correct password.Printing a Job Saved in a Box (Stored Job Print)In a stored job print, a job is saved on the hard disk in the printer by specifying[Store] from the computer, and the job is printed by the printer's control panel orRemote UI. For details on using the Remote UI, see "Remote UI Guide".This section describes the procedure for printing using the printer's control panel.NOTE• The saved jobs remains in the hard disk even after being printed. When you want todelete the saved jobs, use the Remote UI. (See Remote UI Guide)• Using the printer driver, you can change the name of the data to be saved when printingthe data. Enter the name with 24 or less alphanumeric characters.1 Select [Store] in the printer driver on the computer, specifythe box in which you want to store the job, and then print.NOTEUp to the total of 100 jobs in all the boxes can be saved.111234
