6-14Printing Environment Settings6SETUP Menu SettingsPWR SAVE IN ERRON*, OFFSpecifies whether the printer should enter Power Save Mode when an error isoccurring in the printer (when the (Message) indicator is on, or the number inthe message blinks).If this item is set to ON, the printer enters Power Save Mode even when an error isoccurring in the printer.If this item is set to OFF, the printer does not enter Power Save Mode when anerror is occurring in the printer.POWER SAVE TIME30 minutes*, 60 minutes, 180 minutes, 5 minutes, 15 minutesSpecifies the time interval until the printer enters Power Save Mode 1 (the PanelOff mode).NOTE• If the printer is in any of the following status, the printer does not enter Power SaveMode (the Panel Off mode) even when the specified time has elapsed.- An error is occurring in the printer (when the (Message) indicator is on, or thenumber in the message blinks), and PWR SAVE IN ERR is set to OFF.- During the printer's startup- During a shutdown (Only when the hard disk is installed)- While the hard disk is being initialized (Only when the hard disk is installed)WARNING STEPCHECK TONER ................... CONT.PRINTING*, STOP PRINTINGSpecifies whether the printer should continue or stop printing when the followingmessage appears.If CONT.PRINTING is specified, the printer continues printing, displaying theabove message. If STOP PRINTING is specified, the printer stops printing. Then,the printer resumes printing after you release the printer from the Warning statusaccording to the displayed message.Warning Message Printer Status<16 PREP."color" TNR>("color" indicates K, Y, M,or C)The toner cartridge is nearing the end of its life andneeds to be replaced.
