4-18Loading and Outputting PaperPrinting from the Paper Cassette4■ Loading Paper in the Paper Cassette (See p. 4-19)■ Specifying the Size and Type of the Paper in the Paper Cassette (See p.4-31, 4-33)When you changed the size or type of the paper in the paper cassette, specify thefollowing settings using the control panel. You do not need to specify the settings if you donot change the size or type of the paper.The FEEDER MENU options in the SETUP menu• CASSETTE(n) SIZE (n = 1, 2) = the size of the loaded paper• CASSETTE(n) TYPE (n = 1, 2) = the type of the loaded paperWhen printing from DOS, UNIX, or other operating system on which the printer drivercannot be used, specify the following settings also.The FEEDER MENU options in the SETUP menu• STD PAPER SIZE (See p. 6-24) = the size of the loaded paper• STD PAPER TYPE (See p. 6-27) = the type of the loaded paper■ Specifying the Paper Setting in the Printer Driver (See Driver Guide)When printing from the printer driver, specify the following settings. For details on usingthe printer driver, see Help of the printer driver.[Page Setup] Page[Output Size] = the size of the loaded paper[Paper Source] Page[Paper Source] = [Cassette 1] or [Cassette 2][Paper Type] = [Plain Paper]: Plain Paper (60 - 105 g/m2 )[Plain Paper H]: Specify when you want to give a gloss to plain paper (75- 105 g/m2 ) to be printed.[Rough Paper]: Specify when a paper jam occurs or when you want toimprove the fixation on printing coarse paper (75 - 105 g/m2 ) with [Plain Paper] selected.Precautions on Loading PaperLoad paper when the printer status is in any of the following. When the (Job)indicator is blinking, the printer is printing. Do not pull out the paper cassette.IMPORTANTBe sure not to open the covers or paper cassette during printing. The printer may stop,disabling printing.
