3-16 Canceling a JobUsing the Printer3IMPORTANTYou cannot operate the printer while <03 CANCELING JOB> is displayed.Canceling the Process Currently Being Performed (SoftReset)If you want to cancel the process currently being performed, perform SOFT RESETusing the following procedure. A soft reset deletes the print data received by all theinterfaces, the job being processed, and the print data in the printer memory.IMPORTANT• Be sure to operate the printer from the computer to cancel printing before canceling thejob from the printer (Soft Reset).• When a soft reset is performed, the data being printed and the data being received by allthe interfaces is deleted. Therefore, perform printing from the computer again as needed.• The data that has been already sent to the memory are all deleted even if it is the data ofother interface. If you are using the printer on a network, be careful so that this operationdoes not affect the data from other computers when performing this procedure.NOTEHard resets delete all the registered files such as the form data saved in the RAM of theprinter, but soft resets do not delete them.1 Press the (Reset) key.The RESET menu is displayed.2 Select SOFT RESET using [ ] and [ ], then press [OK].Holding down the [OK] key 3 seconds or more is the operation for HARD RESET.When <03 SOFT RESET> disappears, the soft reset is completed.SOFT RESET →RESET →SOFT RESET →03 SOFT RESET