4-25Loading and Outputting Paper4Printing from the Paper CassetteWhen Loading Custom Size Paper (Non-Standard Size Paper) orPaper at a Size of Foolscap or 16KPerform the following procedure to load custom size paper (non-standard sizepaper) or paper at a size of Foolscap or 16K.You can load paper of the following custom paper sizes.• When loading paper in portrait orientation: Width 148.0 to 215.9 mm; Length210.0 to 355.6 mm• When loading paper in landscape orientation (Only when UFR II Printer Driver isused): Width 210.0 to 215.9 mm; Length 210.0 to 215.9 mm1 Pull out the paper cassette.CAUTIONBe sure to take the paper cassette out of the printer before loading paper.If paper is loaded while the paper cassette is partially pulled out, the papercassette may drop or the printer may become damaged resulting inpersonal injury.Cassette 1Pull out the paper cassette gently a.Cassette 2Pull out the paper cassette gently a.While holding the paper cassette withboth hands, remove it from the printerunit as shown in the figure b.While holding the paper cassette withboth hands, remove it from the paperfeeder as shown in the figure b.a ab b
