6-44Printing Environment Settings6SETUP Menu SettingsQUALITY CHANGECONT.PRINTING*, STOP PRINTINGSpecifies whether the printer should continue printing with the image quality of thedata being lowered automatically or stop printing displaying the following errormessage when the memory required for the process runs out.If CONT.PRINTING is specified, the printer prints with the image quality of thedata being lowered automatically without displaying a message.If STOP PRINTING is specified, the printer stops printing, displaying a message.In this case, the printer resumes printing with the image quality of the data beinglowered by pressing the (Online) key.NOTEWhen the message <38 LOW IMGE QLTY> appears frequently by specifyingSTOP PRINTING for this item, perform the following procedure.1. If GRADATION LEVEL is set to HIGH 2, set it to HIGH 1. If you do so,however, the printer prints with the gradation level of the data being lowered.2. When the message still appears after applying the Remedy 1, or when youwant to print with the gradation level of the data as it is, install an optionalexpansion memory module (RAM).Error Message Setting<38 LOW IMGE QLTY>When the printer receives a large amount of data orcomplicated data, the memory required for theprocess may run out, and the printer may print with itsresolution level being lowered automatically. Specifywhether the printer should display an error messagewhen the printer is in this status.
