6-16Printing Environment Settings6SETUP Menu SettingsNOTEThe printer prints when either ON or OFF is specified.DATE AND TIME■ DATE SETTING01/01/2001 to 31/12/2089This printer has a clock function. This clock is used for the printer maintenanceand job history management. Specify date in this item when the clock is notkeeping correct date.NOTE• Date is set before shipment.• Enter date using the following keys on the control panel.- Increases/decreases number ...... [ ] [ ]- Moves digits ................................. [ ] [ ]- Determines the entered date ....... [OK]• If you do not change the date, press the (Online) key.■ TIME SETTING00:00:00 to 23:59:59This printer has a clock function. This clock is used for the printer maintenanceand job history management. Specify time in this item when the clock is notkeeping correct time.NOTE• Time is set before shipment.• The clock in the printer should be accurate within ± 60 seconds per month. Adjustthe clock periodically in this item.• Enter time using the following keys on the control panel.- Increases/decreases number ...... [ ] [ ]- Moves digits ................................. [ ] [ ]- Determines the entered time ........ [OK]• If you do not change the time, press the (Online) key.Setting Status Message/Indicator BlinkCHECK TONER When a toner cartridgeneeds to be replaced soon<16 PREP."color" TNR>("color" indicates K, Y, M, or C)CASSETTEEMPTYWhen the paper cassettehas run out of paperThe Paper Source indicator forthe paper source that has runout of paper blinks.
