8-65Troubleshooting8When You Cannot Obtain Appropriate Printout ResultsRemedy 2 If [Gray Compensation] in the printer driver is set to [Off], poor print quality (aphenomenon of "Out-of-Register Colors") may be alleviated.In order to specify the setting for [Gray Compensation], display the followingdialog box.- For UFR II Printer Driver: Display the [Advanced Settings] dialog box byclicking [Details] in the [Quality] sheet, then clicking [Advanced Settings] in the[Detailed Settings] dialog box.- For PCL Printer Driver: Display the [Detailed Settings] dialog box by clicking[Details] in the [Quality] sheet.The back of the printed paper has smudge marks.Cause The size of the print data was larger than that of the loaded paper.Remedy Check if the size of the print data matches that of the loaded paper.The edge of paper blots during color printing.Cause The [Print with Upper Left of Sheet as Starting Point] check box is selected.Remedy Clear the [Print with Upper Left of Sheet as Starting Point] check box in theprinter driver, then perform printing.In order to specify the setting for [Print with Upper Left of Sheet as StartingPoint], display the [Finishing Details] dialog box by clicking [Finishing Details] inthe [Finishing] sheet.Square areas that cannot be seen on the display appear around lines or text and are printedin a different color from the other areas.Cause A process that is different from the specified halftone process or color processmay be applied depending on the operating system or application.Remedy 1 In the QUALITY MENU options in the SETUP menu, specify the settings forGRAY COMPENSATE (See p. 6-39) so that the setting values for TEXT,GRAPHICS, and IMAGE are all the same, and then set [Gray Compensation] to[Printer Default] in the printer driver.In order to specify the setting for [Gray Compensation], display the followingdialog box.- For UFR II Printer Driver: Display the [Advanced Settings] dialog box byclicking [Details] in the [Quality] sheet, then clicking [Advanced Settings] in the[Detailed Settings] dialog box.- For PCL Printer Driver: Display the [Detailed Settings] dialog box by clicking[Details] in the [Quality] sheet.