6-50Printing Environment Settings6SETUP Menu SettingsNOTE• For more details on configuring the Ethernet driver, see "Chapter 2 CommonNetwork Settings" in Network Guide.• This item is displayed only when NETWORK in the I/F CONNECTION options isset to ON.■ INIT.N/W SET.-By the initialization in this item, you can reset the network settings to the defaultsettings.The network settings can be initialized using the following procedure.1. Press the (Settings) key.2. Select INTERFACE MENU using [ ] and [ ], then press [OK].3. Select NETWORK MENU using [ ] and [ ], then press [OK].4. Select INIT.N/W SET. using [ ] and [ ], then press [OK].5. is displayed. The initialization starts by pressing [OK].* If you press the (Online) key without pressing [OK], the printer does not initialize the settings butbecomes ready to print.NOTEThis item is displayed only when NETWORK in the I/F CONNECTION options isset to ON.EXT.I/F MENU-This is the setting for the expansion interface board installed in the expansion slotof the printer. For more details, see the instruction manual supplied with theexpansion interface board.NOTEThis item is displayed only when the optional expansion interface board is installed,and EXT.INTERFACE in I/F CONNECTION is set to ON.CONNECT.RECOG.ON*, OFFWhen you print using a network, you may not obtain proper printout results(Unreadable characters are printed, etc.). In this case, specify OFF for this item.
