2-35Installing the Printer2Turning the Printer ON and Checking the Printer OperationTurning the Printer ON and Checking the PrinterOperationThis section describes the procedures for turning the printer ON and checking theprinter operation.Turning the Printer ONIMPORTANT• Do not turn the printer ON immediately after turning it OFF. If you want to turn the printerON again after turning it OFF, wait at least 10 seconds after turning the printer OFFbefore turning it ON again.• If the printer does not operate properly or an error message appears, see "When thePrinter Does Not Operate Properly," on p. 2-40.• Be sure to set the paper cassette in the printer before you turn the power ON for the firsttime after you install the printer.NOTEWhen you turn the power ON for the first time after you install a hard disk or when aproblem has occurred to the hard disk, the printer is ready to print after approximately 60seconds after it is turned ON because the hard disk is formatted after the printer is turnedON.1 Press " " of the power switch to turn the printer ON.
