6-21Printing Environment Settings6SETUP Menu Settings• Print secured print data using SECURED PRINT (See p. 6-66) in the UTILITYmenu or the Remote UI.• Secured print data is deleted by turning the printer OFF or performing a hard resetor soft reset even if the time specified in this item has not elapsed yet.• Specify the file name, user name, and password in the printer driver.• This item is displayed only when an optional hard disk is installed, and HARD DISKis set to ON. When HARD DISK is set to OFF, the setting for this item is ignored,and the secured print jobs cannot be deleted.SECURED TYPEIMAGE*, PDLSpecifies the format to be used for when secured print data is saved in this printer.If IMAGE is specified, the data sent from the computer is saved on the hard diskwith the image opened.If PDL is specified, the data sent from the computer is saved on the hard disk as itis.NOTE• If IMAGE is specified, the process time after the password is entered for printingbecomes shorter than when PDL is specified. However, you cannot interrupt thejob that has already started to be printed or stop the operation.• Encrypted secured print data is saved in PDL regardless of the setting for this item.• This item is displayed only when an optional hard disk is installed, and HARD DISKis set to ON.RIP ONCEON*, OFFSpecifies whether to use the function of "RIP Once" when an optional hard disk isinstalled. RIP Once is a function that saves the data of the first copy on the harddisk and prints the second and subsequent copies at a high speed when you printmultiple copies.This function is effective for printing a large amount of copies or multiple copies ofcomplicated data, such as the one that contains many diagrams or images.IMPORTANTAfter changing the settings for this item, cycle the power of the printer or perform ahard reset to make the settings effective.NOTE• This function may have little effect on printing relatively simple data such as the onethat contains only text or small amount of copies.
