6-32Printing Environment Settings6SETUP Menu SettingsBIND.LOCATIONLONG EDGE*, SHORT EDGESpecifies which edge of the paper, the long edge or short edge, is to be bound.When you want to bind paper on which 2-sided printing is performed, the printeradjusts the binding location automatically according to the paper surface.Specify the binding location (top/bottom/left/right) and its width in GUTTER (Seethe next item).If LONG EDGE is specified, the binding location is created on the long edge of thepaper.If SHORT EDGE is specified, the binding location is created on the short edge ofthe paper.NOTEYou cannot create a gutter only by specifying this item. A gutter can be created onlyafter specifying this item in combination with the setting for GUTTER.GutterFront BackGutterFront Back2-sided printing inportrait orientation2-sided printing inlandscape orientationDEFABC ABCDEFGutterGutterFront Front BackBackDEFABCABC DEFGutterGutter2-sided printing inportrait orientation2-sided printing inlandscape orientationGutterGutter
