Installing a Hard Disk 9-23Installing the Optional Accessories9IMPORTANT• The main board and hard disk contain components that are sensitive to static electricity.Observe the following precautions when handling them to prevent damage from staticelectricity.- Touch a metal object to dissipate static electricity before handling them.- When handling them, do not touch anything that generates static electricity such as thecomputer display.- Do not touch the main board parts, printed wire, or connectors with your hands.- To prevent the hard disk from being affected by static electricity, keep it in the protectivebag until it is ready to be installed. Also, keep the hard disk away from products thatgenerate strong magnetic waves.• Do not drop or jolt the hard disk.• Because the hard disk is a precision device, do not press on the top of its drive, place itover another, or hit it against other objects.• Be sure not to remove any label or others attached to the top of the drive of the hard disk.Also, do not attach any other labels.• Do not move the hard disk suddenly from a cool location to a hot location.• Be sure to observe the cautions in the caution label attached to the hard disk. If yourfamiliar language is not used in the caution label, place the caution label supplied withthe hard disk over the currently attached caution label.• After installing the hard disk, you need to initialize the SETUP menu. Therefore, if youhave changed the printer setting, output the Configuration Page Print and confirm andsave the status of the printer setting before installing the hard disk. For details on theprocedure for outputting Configuration Page Print, see "Checking the Operations withConfiguration Page Print," on p. 2-37.
