6-29Printing Environment Settings6SETUP Menu SettingsCASSETTE(n) TYPE (n = 1, 2)PLAIN PAPER*, PLAIN PAPER H, ROUGH PAPER, MIXED TYPESSpecifies the type of the paper to be loaded in the paper cassettes (Cassette 1and 2). This printer internally applies the optimum print mode for the paper typespecified in this item.Each print mode supports the following paper types.• PLAIN PAPER: Plain Paper (60 - 105 g/m2 )• PLAIN PAPER H: Specify when you want to give a gloss to plain paper (75 - 105g/m2 ) to be printed.• ROUGH PAPER: Specify when a paper jam occurs or when you want toimprove the fixation on printing coarse paper (75 - 105 g/m2 )with PLAIN PAPER selected.IMPORTANT• This printer applies the optimum print mode for the interior of the printer accordingto the type of the paper loaded in the paper cassette. If the type of the paperloaded in the paper cassette and the setting for the print mode do not match, thismay result in crucial damage to the engine.When printing from Windows or Macintosh using the paper cassette, be sure tomatch the type of the paper loaded in the paper cassette, the setting forCASSETTE(n) TYPE (n = 1, 2), and the setting for [Paper Type] in the printer driver.If they do not match, the printer stops printing, displaying an error message.When printing from DOS, UNIX, or other operating system on which the printerdriver cannot be used, be sure to match the type of the paper loaded in the papercassette, the setting for CASSETTE(n) TYPE (n = 1, 2), and the setting for STDPAPER TYPE.• If MIXED TYPES is specified, the printer does not check the type of the loadedpaper against the paper type specified in the printer driver. Make sure that thepaper type specified in the printer driver matches the type of the paper loaded inthe paper cassette before using the printer.NOTE• You can specify the same setting in CASSETTE(n) TYPE (n = 1, 2) in the SELECTFEEDER menu.• CASSETTE2 TYPE is displayed only when the optional paper feeder is installed.
