4-49Loading and Outputting Paper4Printing from the Multi-purpose Tray• When you change the paper loaded in the multi-purpose tray frequently, it is convenient ifTRAY PAPER SIZE in the control panel is set to MIXED SIZES. If TRAY PAPER SIZE isset to MIXED SIZES, you do not need to specify the setting for TRAY PAPER SIZE eachtime you load different size paper. However, when specifying MIXED SIZES, make surethat the size of the paper loaded in the multi-purpose tray matches the paper sizespecified in the printer driver before printing. If they do not match, the printer may stopprinting, displaying the message <41 CHK PAPER SZE>, or a paper jam may occur. Besure to check if the paper size specified in the printer driver matches the size of the paperloaded in the multi-purpose tray before using the printer. However, if SPECIAL MODE J(See p. 6-52) is set to ON, the printer prints without checking the paper size even whenthe paper size specified in the printer driver and the size of the paper loaded in themulti-purpose tray do not match.• When printing custom size paper from UFR II Printer Driver, you can load the papereither in portrait or landscape orientation. However, if you want to print custom size paperof its long edges 215.9 mm or less when TRAY PAPER SIZE is set to MIXED SIZES, loadthe paper in landscape orientation. When you are not printing from UFR II Printer Driver,load the paper in portrait orientation.NOTEThe names of the following paper sizes are indicated by an abbreviation.Legal: LGL, Letter: LTR, Executive: EXEC, Statement: STMT, Foolscap: FLSC1 Press the (Settings) key.2 Select FEEDER MENU using [ ] and [ ], then press [OK].3 Select TRAY PAPER SIZE using [ ] and [ ], then press [OK].SETUPCONTROL MENU →FEEDER MENU →TRAY PAPER SIZE→TRAY PAPER SIZE→=A4 →
