4 Print Drivers42 Xerox Phaser 3635 System Administration Guidei) Click on the [Next] button.j) Click on the [Finish] button.9. You will return to the Add Printer Wizard window and be prompted for a PrinterDriver.10. Load the Print and Fax Drivers CD into the CD drive. If the CD autoruns, click [Exit].11. Click on the [Have Disk] button.12. Click on the [Browse] button.13. Locate the Drivers folder on the CD and click on the required driver from the list.14. Click on the [Open] button.15. Click on the [OK] button.16. Select the model of your machine from the list.17. Click on the [Next] button.18. Enter Printer Name (or accept the default name).19. Click on the [Next] button.20. If you want this to be your default printer, click on [Yes].21. Click on the [Next] button.22. The Printer Sharing Screen appears.If you will be sharing this printer with other clients, then:a) Select:• [Share As:] - Windows 2000.• [Share Name] - Windows XP/2003.b) Enter a Share Name.c) Click on the [Next] button.23. Enter the [Location] (Add a Comment if necessary.)24. Click on the [Next] button.25. Click on [Yes] to print a test page. Close the Test Page window if necessary.26. Click on the [Next] button.27. Click on the [Finish] button. The printer driver will install.28. Verify that the test page is printed at the machine.AppleTalk PrintingThe Internet Services AppleTalk® page allows you to configure the machine to supportAppleTalk® .Information Checklist1. The AppleTalk settings must be correctly configured on the machine.2. Locate the CentreWare Print and Fax Drivers CD delivered with your machine.
