CentreWare Internet ServicesXerox Phaser 3635 System Administration Guide 99. Touch [Physical Media].10. Select the Speed to match the speed set on your hub or switch.11. Touch [Save].12. Press the button.13. Touch [Confirm] to exit the Tools Pathway.Printing a Configuration ReportFollow these steps to print a Configuration Report:1. Press the button on the Control Panel.2. Touch the [Information Pages] tab.3. Touch [System Configuration].4. Touch [Print].5. Touch [Close].CentreWare Internet ServicesCentreWare Internet Services is the embedded HTTP server application that resides in thedevice. Internet Services allows Administrators to change network and system settings onthe device from the convenience of their desktops.Many features available on your machine will need to be set via the machine and theCentreWare Internet Service.Many of the features available within Internet Services will require an AdministratorUsername and Password. The default Username is admin and the default Password is 1111.System ConfigurationTo use CentreWare Internet Services, you need to enable both TCP/IP and HTTP on themachine. See Configure Static IPv4 Addressing using the Machine User Interface onpage 13, or Configure Dynamic IPv4 Addressing using the Machine User Interface onpage 15, or Configure IPv4 or IPv6 Settings using CentreWare Internet Services on page 17.Access CentreWare Internet ServicesTo view the [Internet Services Welcome] screen:1. At your Workstation, open the Web browser, enter the TCP/IP Address of the machinein the Address bar.2. Press [Enter] or click on the [Go] button. For example:
