5 Network Scanning60 Xerox Phaser 3635 System Administration Guideg) Click on the [Add] button in the [Default File Destination] area.NOTE: If the Default File Destination has previously been configured, click on[Edit].h) Select [HTTP] or [HTTPS] from the [Protocol] drop-down menu.i) Click on the [Get Example Scripts] link under Script Path and Filename: todownload an example script in PHP, ASP or Perl language:j) Select an appropriate Script Language file which is supported by your HTTP ScanRepository server.k) Right click on the required script and select [Save Target As...] to save the file toyour HTTP Scan Repository server.l) Save the [.zip] or [.gz] file to a location on the desktop and extract it.m) Extract the downloaded file to the root of the [Web Services] home directory.Write down the path and filename as you will need it later.3. Create a login account for the Xerox machine on the Web Server:a) Create a home directory for the machine.b) Add a [bin] directory to the home directory.c) Place an executable script in the [bin] directory.d) Write down the complete path to the executable script.When a document is scanned, the machine logs in using the account, sends a POSTrequest along with the scanned file, and then logs out.The script handles the renaming details of the file transfer.4. Create a directory on the Web Server to be used as a Network Scanning location(repository):a) Set the appropriate read/write and directory browsing permissions.b) Write down the Directory path.5. Test the connection:a) Log in to the machine's directory on the Web Server.b) Send a POST request and file to the Web Server.c) Check to see if the file was received at the repository.6. The script can be defined with script_name.extension or bypath/script_name.extension.Procedure1. At your Workstation, open the web browser, enter the TCP/IP Address of the machinein the Address bar.2. Press [Enter].3. Click on the [Properties] tab.4. Click on the [Services] link.
