Xerox 3635MFP - Phaser B/W Laser System Administration Manual

Also see for 3635MFP - Phaser B/W Laser: Features Brochure & specs User guide User guide Quick use guide

Contents

Xerox 3635MFP - Phaser B/W Laser System Administration Manual Manual pdf 200 page image

188 Xerox Phaser 3635 System Administration GuideXerox public MIBs are located at: http://ftp.xerox.com/pub/drivers/MIBs/Customers can download the MIBs and use their SNMP tool to obtain the requiredinformation.Enable/Disable System Timer ValuesTo enable or disable any System Timer Value for either of the following must be carried outon the machine:• System Time Out• Incomplete Scan• Held Job Time OutAt the machine1. Press the button on the machine to enter the Tools Pathway.2. Enter the Administrator’s Password. The default is 1111.3. Touch [Enter].4. Press the button.5. Touch [Tools].6. Touch [Device Settings].7. Touch [Timers].To enable System Time Out8. Touch [System Time Out].9. Touch [Enable], to set the timer to indicate when user selections will return to theirdefault settings.10. Select the timer value (1 and 10 minutes) by touching the UP and DOWN arrow.11. Touch [Save] to return to the Timers menu.To enable Incomplete Scan12. Touch [Incomplete Scan].13. Touch [Enable], to set the timer to indicate when to delete an incomplete scan job.14. Select the timer value (1 and 10 minutes) by touching the UP and DOWN arrow.15. Touch [Save] to return to the Timers menu.To enable Held Job Time Out16. Touch [Held Job Time Out].17. Touch [Enable], to set the timer to indicate how long the System will hold incompletejobs before automatically deleting them.