Xerox 3635MFP - Phaser B/W Laser System Administration Manual

Also see for 3635MFP - Phaser B/W Laser: Features Brochure & specs User guide User guide Quick use guide

Contents

Xerox 3635MFP - Phaser B/W Laser System Administration Manual Manual pdf 149 page image

802.1X AuthenticationXerox Phaser 3635 System Administration Guide 137The Administrator can configure the machine to use one EAP type. EAP types supported onthe Xerox machine are:• EAP-MD5• PEAPv0/EAP-MS-CHAPv2• EAP-MS-CHAPv2Information Checklist1. 802.1X authentication must be supported on the network where Xerox machines areconnected.2. Ensure that your 802.1X Authentication Server and authentication switch areavailable on the network.3. Create a Username and Password on your Authentication Server which will be usedto authenticate the machine.NOTE: Write down the Username and Password and keep in a safe place.Enable 802.1X1. Press the button on the machine to enter the Tools Pathway.2. Enter the Administrator’s Password. The default is 1111.3. Touch [Enter].4. Press the button.5. Touch the [Tools] tab.6. Touch [Connectivity & Network Setup].7. Touch [Advanced].8. Touch [Network Setting]9. Touch [802.1X].10. Touch [Enable].11. Touch the EAP type used on your network.12. Touch the keyboard button.13. Enter the Username required by your authentication server.14. Touch [Enter].15. Enter the Password required by your authentication server.16. Touch [Enter].17. Touch [Save].Enable 802.1X using the CentreWare Internet Service1. At your Workstation, open the web browser, enter the TCP/IP Address of the machineinto the Address bar.