Windows PrintingXerox Phaser 3635 System Administration Guide 41Install Printer Driver1. At your Workstation, from the [Start] menu, select the appropriate option from thefollowing:• For Windows 2000/2003, click on [Settings] then [Printers].• For Windows XP, click on [Printers and Faxes]. If you cannot see this option inthe [Start] menu, then click on [Start], followed by [Control Panel] first.• For Windows Vista, click on [Control Panel] then [Printers].2. Click on [Add Printer] in the far left column.3. The [Add Printer Wizard] window will appear. Click on the [Next] button.4. Select:• [Local Printer] for Windows 2000• [Local Printer attached to this computer] for Windows XP/2003If already selected, click on [Automatically detect and install my Plug and Playprinter] to deselect it.5. Click on the [Next] button.6. Click on [Create a new port].7. Click on [Standard TCP/IP Port] from the Type of Port pull down menu, and click onthe [Next] button.8. Follow the relevant steps for your configuration:Windows XPa) The Add Standard TCP/IP Printer Port wizard opensb) Click on the [Next] button.c) Enter the Printer Name or IP Address of the printer.d) Enter a name for the print queue in the Port Name box (or accept the default).e) Click on the [Next] button.f) Ensure 9100 appears as the Port Number and click on the [OK] button.g) Click on the [Finish] button.Windows 2000/2003a) Select TCP/IP Printer from the Device Type drop down menu.b) Enter the Printer Name or IP Address of the printer.c) Enter a name for the print queue in the Port Name box (or accept the default)and click on the [OK] button.d) Click on the [Next] button.e) Uncheck the box [Query].f) Click on [Settings].g) Click on [Raw].h) Ensure 9100 appears as the Port Number and click on the [OK] button.
