5 Network Scanning56 Xerox Phaser 3635 System Administration GuideEnable the Feature from the Machine1. Press the button on the machine to enter the Tools Pathway.2. Enter the Administrator’s Password. The default is 1111.3. Touch [Enter].4. Press the button.5. Touch [Tools].6. Touch [User Interface].7. Touch [Service Enablements].8. Touch [Network Scanning].9. Touch [Enable].10. Press the button.11. Touch [Confirm] to exit the Tools Pathway.Configure a RepositoryNetwork Scanning with the machine is accomplished through the use of a Network Scanningrepository. The repository is a folder on a Server or Workstation, which the machine canaccess. When a User scans a document, the machine puts the image into the repository. Toconfigure Network Scanning you must tell the machine the path to the repository.The machine can use 4 different ways to transfer a scanned image to the repository:1. FTP (File Transfer Protocol) - see File Transfer Protocol (FTP) on page 56.This is used to scan to a computer that is configured with FTP services.2. SMB (Server Message Block) - see Server Message Block (SMB) on page 58.This is used to scan to a computer that supports the SMB protocol.3. HTTP (Hyper Text Transport Protocol) - see HTTP/HTTPS on page 59.This is used to scan to a Web Server.4. HTTPS (Hyper Text Transport Protocol over Secure Socket Layer) - seeHTTP/HTTPS on page 59.This is used to scan to a Secure Web Server.File Transfer Protocol (FTP)Information Checklist1. Ensure that File Transfer Protocol (FTP) services are running on the Server orWorkstation where images scanned by the machine will be stored.
