Xerox 3635MFP - Phaser B/W Laser System Administration Manual

Also see for 3635MFP - Phaser B/W Laser: Features Brochure & specs User guide User guide Quick use guide

Contents

Xerox 3635MFP - Phaser B/W Laser System Administration Manual Manual pdf 45 page image

CloningXerox Phaser 3635 System Administration Guide 33b) Specific features - deselect the checkboxes next to the feature(s) that you DONOT want to clone.3. Click on [Clone].If prompted, enter the Administrator’s User ID [admin] and Password [1111] andclick on [Login].4. A [Cloning.dlm] link will appear. Right-click on the link and click on [Save Target As].5. A dialog box will prompt you to specify the name and location for the cloned file.Ensure that the extension reads [.dlm].NOTE: You can save the Clone file onto a laptop or PC.6. Click on [Save]. The [.dlm] file can now be used to clone other machines.Install Clone File to another DeviceNOTE: This procedure will cause the machine to reboot. It will be unavailable over thenetwork for several minutes.1. At your Workstation, open the web browser, enter the TCP/IP Address of the machinein the Address bar.2. Press [Enter].3. Click on the [Properties] tab.4. Click on the [General Setup] link.5. Click on the [Cloning] link.6. In the [Install Clone File] area, click on the [Browse] button.If prompted, enter the Administrator’s User ID [admin] and Password [1111] andclick on [Login].7. Click on the [.dlm] cloning file located on the laptop or PC.8. Click on [Open].9. Click on [Install] to submit the file to the machine.The machine will not be available over the network for several minutes.