Windows PrintingXerox Phaser 3635 System Administration Guide 375. Click on the [OK] button. Your computer may need to restart.Install Printer Driver1. From the [Start] menu, follow the appropriate option from the list below:• Windows 2000/2003 - Click [Settings] then [Printers].• Windows XP - Click [Printers and Faxes]. If you cannot see this option in the[Start] menu, then click on [Start], followed by [Control Panel] first.• Windows Vista - Click [Control Panel] then [Printers].2. Windows XP/2000/2003:a) Click on [Add Printer] in the far left column.b) Click on the [Next] button for Windows XP/2000/2003 only.Windows Vista:a) Double-click on [Add Printer].3. Select:• For Windows 2000 - [Local Printer].• For Win XP/2003 - [Local Printer attached to this computer].NOTE: If already selected, click on [Automatically detect and install my Plug andPlay printer] to deselect it.• For Windows Vista - [A printer attached to my computer].Now go to step 5.4. Click on the [Next] button.5. Click on [Create a new port].6. Select the following option from the Type of Port pull down menu:• For Windows 2000/2003 select [LPR].• For Windows XP/Vista select [LPR Port].7. Click on the [Next] button.8. Enter the IP Address of the printer.9. Enter:• Printer name for Windows XP/2000/2003.• Print Queue name for Windows Vista.10. Click on the [OK] button.11. You will be prompted for a Printer Driver. Click on [Have Disk].12. Click on the [Browse] button.13. Locate the Drivers folder on the CD and select the required Printer Driver file [.inf].14. Click on the [Open] button.15. Click on the [OK] button.16. Click on the Printer Model from the list.
