3 Network Installation32 Xerox Phaser 3635 System Administration Guide2. Follow the steps above in Create the Print Queue.CloningCloning enables you to conveniently copy the settings and scan templates of one machineand transfer them to another machines with the same system software version. Groups ofsettings can be cloned, depending on the optional services installed on the machine. Forexample, scan settings will be available for cloning only if the Network Scanning optionalservice is already installed on the source machine. It is not possible to install a servicethrough the process of cloning.Procedure1. Verify the Software Version - for all machines involved in cloning.2. Clone a Machine - select and save the features or settings.A Configuration Cloning File is created and saved with the extension [.dlm](downloadable module).3. Install the Clone File onto another Machine - using CentreWare Internet Services.The features and settings are transferred and applied to the recipient machine.NOTE: All machines involved in the Cloning procedure must contain the same systemsoftware version.Verify the Software Version1. At your Workstation, open the web browser, enter the TCP/IP Address of the machinein the Address bar.2. Press [Enter].3. Click on the [Properties] tab.4. Click on [General Setup].5. Click on [Configuration].6. Scroll down and view the [Printer Setup] area.7. View the System Software Version. Verify that all machines involved in the cloningprocedure show the same system software version.NOTE: Do not close the web browser.Clone a Machine1. Within the [General Setup] area of CentreWare Internet Services, click on [Cloning].2. You have one of the following cloning options:a) All features - DO NOT deselect any checkboxes.
