Xerox 3635MFP - Phaser B/W Laser System Administration Manual

Also see for 3635MFP - Phaser B/W Laser: Features Brochure & specs User guide User guide Quick use guide

Contents

Xerox 3635MFP - Phaser B/W Laser System Administration Manual Manual pdf 41 page image

UnixXerox Phaser 3635 System Administration Guide 2918. Click on [Continue].19. The Printer Added Successfully message will appear.Dynamic AddressingInformation ChecklistSee Chapter 3, Configure Dynamic IPv4 Addressing using the Machine User Interface,Information Checklist on page 15.Procedure1. Follow the steps in Chapter 3, Configure Dynamic IPv4 Addressing using the MachineUser Interface, Procedure on page 16 until step 38, then return to this page.IMPORTANT: Click on [BOOTP] in step 9.Create the Print Queue2. Follow the steps above in Create the Print Queue on page 29.Linux LPR via PrintToolStatic AddressingInformation ChecklistBefore starting the Installation procedure, please ensure that the following items areavailable and/or the tasks have been performed:1. See Chapter 3, Configure Static IPv4 Addressing using the Machine User Interface,Information Checklist on page 13.2. Linux operating system that supports PrintTool.NOTE: Not all distros of Linux support PrintTool.Procedure1. Follow the steps in Chapter 3, Configure Static IPv4 Addressing using the MachineUser Interface, Procedure on page 14 until step 38, then return to this page.Create the Print Queue2. Log in, at the Linux Client, as root in a terminal.3. Enter printtool.4. The Red Hat Linux Print System Manager will launch.5. Click on the [Add].6. The [Add a Printer Entry] window will appear.