Xerox Phaser 3635 System Administration Guide 899 Server FaxThis chapter explains how to set up the Server Fax feature of the machine.This is the procedure to follow to install and setup this feature:1. Overview on page 892. Information Checklist on page 893. Insert the Feature Enablement Key on page 904. Enable the Server Fax from the Machine on page 905. Configure a Server Fax Repository on page 906. Optional Step: Configure Defaults on page 957. Test the Server Fax on page 96OverviewThe optional Server Fax feature enables users to send documents to one or more faxmachines via the telephone network without having a dedicated telephone line connectedto the machine. This is achieved by connecting the machine to a network Fax Server whichcan manage fax transmissions throughout an organisation. The Server Fax feature usesXerox Partner solutions. Refer to your Xerox Representative for further information.Server Fax and Embedded FaxThe Embedded Fax and optional Server Fax services are mutually exclusive and only one ofthem can be enabled at any time.If Server Fax is currently enabled and Embedded Fax is then enabled, Server Fax will bedisabled automatically.If Embedded Fax is currently enabled and Server Fax is then enabled, Embedded Fax will bedisabled automatically.Information ChecklistBefore starting the Installation procedure, please ensure that the following items areavailable and/or the tasks have been performed:1. Ensure that the machine is fully functioning on the network.
