4 Print Drivers48 Xerox Phaser 3635 System Administration Guidee) Click [OK].6. To add transparencies separators:a) In [Paper] select [Transparency Separators...].b) Configure the separator options.c) Click [OK].7. Configure any other print settings, such as [2-Sided Printing], then click [OK].NOTE: Any options selected in Printing Preferences will become the default settingsfor your driver.Saved Settings1. Ensure that you are on the [Paper/Output] tab.2. Click on the [Saved Settings] menu.3. To save your driver settings, click on the [Save] button and enter a name to describethe settings.4. Click on the [OK] button.5. The settings can be selected from the [Saved Settings] menu.Layout/WatermarkThe Layout/Watermark tab allows you to print your document as multiple images on a pageor as a booklet. You can also create and print watermarks on your documents.AdvancedThe Advanced tab contains settings specific to the driver, such as Postscript options andFont selections. You can also select to enable or disable the Banner Sheet.1. Configure the advanced settings, as required.2. Click on the [OK] button to close the driver.Configure the Windows Printer DriverBi-Directional Communication1. Follow the steps below that are specific to your operating system:Windows Vistaa) Right-click on the printer in the Printers list and select [Properties].Windows 2000/2003a) From the [Start] menu, click on [Settings] then [Printers].b) Right-click on the printer icon and select [Properties].Windows XP
