Configure a RepositoryXerox Phaser 3635 System Administration Guide 59NOTE: It is recommended that the default port setting is used.12. Enter the name of the [Share].13. Enter the path from the Share to your specific folder in the [Document Path] entrybox.For example, if the path is sharename/wc/scans, enter /wc/scans in the [DocumentPath] entry box.14. Enter the Login Name and Password in the [Login Name] and [Password] boxes.NOTE: The supplied Username must have permission to access the Scan folder.15. Enter the Password again in the [Retype password] entry box.16. Select the [Select to save new password] checkbox.17. Click on the [Apply] button to accept the changes.If prompted, enter the Administrator’s User ID [admin] and Password [1111], andclick on [Login].18. Continue to Optional Step: Configure General Settings – page 63.HTTP/HTTPSInformation ChecklistBefore starting the Installation procedure, please ensure that the following items areavailable and/or the tasks have been performed:1. Ensure that web services and a web service (such as Apache) are running on theserver:a) The machine will send POST requests and scanned data to the Server forprocessing by a CGI script.NOTE: HTTP and HTTPS protocol both require server-side scripts to allow files to betransferred to your HTTP server from your machine.CGI (Common Gateway Interface) script. A program that is run on a web server, inresponse to input from a browser. The CGI script is the link between the server and aprogram running on the system, i.e a database.b) Write down the IP Address or Host Name of the Server.2. Download a sample script:a) At your Workstation, open the web browser, enter the TCP/IP Address of themachine in the Address bar.b) Press [Enter].c) Click on the [Properties] tab.d) Click on the [Services] link.e) Click on the [Network Scanning] link.f) Click on the [File Repository Setup] link.
