4 Print Drivers52 Xerox Phaser 3635 System Administration Guide19. To add a new print, click on:• [Add].or• [Printers] menu then [Add Printer].20. Click on [IP Printing] from the top menu.21. Click on [Internet Protocol Printing] or [LPD/LPR Printing] from the next menu.22. Enter the IP Address of the printer.23. Enter the Print Queue Name. (You may leave this blank).24. Click on [Xerox] from the Printer Model list.25. Select your Printer Model from the list.26. Click on [Add]. The machine will appear in the Printer List.27. Select the Printer and click on [Show Info].28. Click on [Installable Options].29. Select the options as installed on your machine.NOTE: If you want to use the Save Job for Reprint feature, then make sure that JobStorage is set to [Installed].30. Click on [Apply Changes].31. Close the [Printer Info] box.32. Print a document to verify that the printer is installed correctly.Configure your Apple Mac Print DriverInformation ChecklistBefore starting the Installation procedure, please ensure that the following items areavailable and/or the tasks have been performed:1. The appropriate printer driver should be installed on your Macintosh operatingsystem.ProcedureConfiguration1. Click on [Printer Setup Utility] on the Dock and go to step 6, or:2. Double-click on the hard drive icon on the desktop.3. Double-click on [Applications].4. Double-click on [Utilities].5. Double-click on [Printer Setup Utility].6. Select the printer and click on [Show Info].7. Click on [Installable Options].
