Xerox 3635MFP - Phaser B/W Laser System Administration Manual

Also see for 3635MFP - Phaser B/W Laser: Features Brochure & specs User guide User guide Quick use guide

Contents

Xerox 3635MFP - Phaser B/W Laser System Administration Manual Manual pdf 114 page image

11 LAN Fax102 Xerox Phaser 3635 System Administration GuideConfigure the Printer Driver - Automatically1. From the [Start] menu click on one of the following:• Windows XP - [Printers and Faxes], If you cannot see this option in the [Start]menu, then click on [Start], followed by [Control Panel] first.• Windows 2000 - [Settings] then [Printers].• Windows 2003 - [Settings] then [Printers and Faxes].2. Right-click on your printer driver and click on [Properties].3. Click on the [Configuration] tab.4. Click on [Bi-Directional Setup].5. Enter the IP Address of your printer, if necessary.6. Ensure Bi-directional Communication is set to Automatic, or click on [Manual] andenter the Device Name or IP Address. Click on [OK].7. Click on [Installable Options].8. Ensure that LAN Fax shows a status of [Installed].9. Click on [OK].Configure the Printer Driver - ManuallyTo configure the printer driver without using bi-directional communication return to theConfiguration tab within the Properties of the printer driver.1. Click on [Installable Options].2. Click on the [LAN Fax] menu.3. Click on [Installed].4. Click on [OK].5. Click on [OK] to close the printer driver Properties.Use the FeatureWindows1. At your Workstation, open a document that you want to fax.2. Click on [File] then [Print].3. Click on your printer.4. If you have a [Properties] or [Preferences], click on it.5. Check that you are on the [Paper/Output] tab.6. Click on the [Job Type] menu.7. Click on [Fax].