15 Security146 Xerox Phaser 3635 System Administration GuideAudit LogThe Audit Log is a list of activities that have been completed at the machine and is displayedin a raw text format. The Internet Services Audit Log screen allows the administrator toenable the machine to download an audit log.IMPORTANT: Audit Log cannot be enabled until SSL (Secure Sockets Layer) is enabled onthe machine. To enable SSL on a machine, the machine needs to have a Server Certificate.For instructions to set up a Server Certificate, see Machine Digital Certificate Management& Trusted Certificate Authorities on page 148.Enable and Download the Audit Log1. At your Workstation, open the web browser, enter the IP Address of the machine inthe Address bar.2. Press [Enter].3. Click on the [Properties] tab.4. Click on [Security] link.5. Click on the [Audit Log] checkbox.6. Click on [OK].7. Click on the [Apply].8. To view the log, click on the [Save as Text File]. The Audit Log information iscompiled.Right-click on the [Download Log] link to save to a local client.9. The Audit Log is saved as [Auditfile.txt.gz]. This is a text file compressed as a GZIPfile.10. Open the [Auditfile.txt.gz] compressed file.11. The Auditfile.text is a raw text file. To view the Audit Log as tab-delimited text, openthe Auditfile.txt document in an application that can import text as a tab-delimiteddocument, such as Microsoft ® Excel.View the Audit Log FileEvent IDA unique value that identifies the entry. The following list shows the ID number allocated toeach type of activity displayed in the Audit Log:1 = System startup2 = System shutdown3 = On Demand Image Overwrite started4 = On Demand Image Overwrite complete5 = Print job
