15 Security136 Xerox Phaser 3635 System Administration Guide6. Re-type the password in the [Retype Password] field.7. Enter the user's e-mail address in the [E-mail Address] field.8. Enter the user’s phone number in the [Phone Number] field.9. Click on [Apply] to add the new User.10. You can export the list of User accounts to your computer and then open and makechanges to the file in an application that supports comma separated values .CSVfiles, for example Microsoft Excel:a) Click on the [Export to File] button within the [User Accounts] area.b) Select a location on your computer where you want to save the list. It isrecommended that you save the user account list in case of a problem with themachine.c) Open the [.csv] file to edit the list of user accounts. Up to 5000 user accounts canbe created.11. To upload the amended list back to the machine:a) Click on the [Import from File] button within the [User Accounts] area.b) Browse to the location of the list and click on [Apply]. The list will populate theUser Accounts area.12. Follow the steps below.Verify that Local Authentication is enabled at the machine:13. Select a feature tab, such as Network Scanning or E-mail.NOTE: It may be necessary to press the button first.14. Enter a local user account and password.15. Touch [Enter]. The optional feature should become accessible.802.1X AuthenticationThis is the procedure to follow to install and setup 802.1X Authentication:1. Overview on page 1362. Information Checklist on page 1373. Enable 802.1X on page 137OverviewThe Xerox machine supports IEEE 802.1X Authentication via Extensible AuthenticationProtocol (EAP). IEEE 802.1X ensures all machines on the network are authenticated andauthorized to use the network. 802.1X can be enabled for machines connected throughwired Ethernet networks.
