File Destinations SetupXerox Phaser 3635 System Administration Guide 615. Click on the [Network Scanning] link.6. Click on the [File Repository Setup] link.7. Click on the [Add] button in the [Default File Destination] area.NOTE: If the Default File Destination has previously been configured, click on [Edit].8. Optional Step:Enter a name to describe the File Destination in the [Friendly Name] entry box.9. Select [HTTP] or [HTTPS] from the [Protocol] drop-down menu.10. Click on [IP Address] or [Host Name] and enter either the IP Address or the HostName of the Web Server.NOTE: The default Port Number is 80 for HTTP and 443 for HTTPS.11. In the [Script path and filename] entry box, enter the path to the script, starting atthe root.12. Enter the path to your specific folder in the [Document Path] entry box.For example, enter /wc/scans in the [Document Path] entry box.13. Enter the User Account and Password in the [Login Name] and [Password] boxes.NOTE: The supplied Username must have permission to access the Scan folder.14. Enter the Password again in the [Retype password] entry box.15. Select the [Select to save new password] checkbox.16. Click on the [Apply] button to accept the changes.If prompted, enter the Administrator’s User ID [admin] and Password [1111], andclick on [Login].17. Continue to Optional Step: Configure General Settings on page 63.File Destinations SetupYou can setup one Default filing destination and up to 3 possible Alternate filingdestinations in the [File Repository Setup] screen:• This feature can be used to add alternate Network Scanning locations, which can thenbe selected when a template is created from the machine’s web pages.• If you have only setup 1 filing destination, go to the next section.To Add a File Destination:1) Click on the [File Repository Setup] link.2) Click on the [Add] button within the [Alternate File Destinations] section.3) Optional Step:Enter a name to describe the Filing Destination in the [Friendly Name] entrybox.
