Xerox Phaser 3635 System Administration Guide 12514 SMart eSolutionsThis chapter explains how to set up the SMart eSolutions of the machine.This is the procedure to follow to install and setup this feature:1. Overview on page 1252. Information Checklist on page 1253. SMart eSolutions Information on page 1264. Setup Meter Assistant on page 1275. Supplies Assistant on page 127OverviewSMart eSolutions provides Xerox customers with a setup page to guide you through thesteps required to configure the device for automatic meter readings. SMart eSolutionsprovides the ability to automatically send data to Xerox to be used for billing(MeterAssistant) and toner replenishment (SuppliesAssistant).There are three ways to register a device for SMart eSolutions:• Client Direct registration (Default)• SMart eSolutions Windows Client• CentreWare Web.For a full description of SMart eSolutions and to download the applications (SMarteSolutions Windows Client or CentreWare Web), refer to www.xerox.com/smartesolutions.Information ChecklistBefore registering machines for Meter Assistant, please ensure that the following tasks havebeen performed:• Ensure the device is fully functioning on the network.• TCP/IP and HTTP protocols must be enabled on the device so that the device webbrowser can be accessed. (Device Direct).• Enable SNMP (SMart eSolutions Client and CentreWare Web). If you want to useSMart eSolutions Windows Client or CentreWare Web, visitwww.xerox.com/smartesolutions.