5 Network Scanning64 Xerox Phaser 3635 System Administration Guidec) Off - Turns off the Confirmation Sheet printing function.Distribution Templates8. Users can create Scan Templates with specific Network Scanning settings anddestinations.If you want the machine to automatically update templates stored in the TemplatePool (a repository on the network), then enter the required time for the update in the[Refresh Start Time] area.9. To update the Template Pool List manually, click on the [Refresh Template List Now]button.NOTE: The Refresh Template List capability only applies to templates stored in aTemplate Pool. Templates stored on the device are updated automatically.Job Log10. Click on the [Username] and [Domain] / [Tree] / [Realm] boxes if you want these toappear in the Job Log when Users log in to the machine when NetworkAuthentication is enabled.11. Click on [Apply].Optional Step: Configure the Default TemplateThe Default Template is created when you install Network Scanning. The Default Templateconsists of scan settings and at least one filing location. Once the Default Template hasbeen configured all subsequent templates that are created using Internet Services willinherit the settings. If required the User can change the settings within any new templatescreated. Before the Default Template can be used, at least one filing location must be setup.The Default Template cannot be deleted.Setting up the Default Template1. At your Workstation, open the web browser, enter the TCP/IP Address of the machinein the Address bar.2. Press [Enter].3. Click on the [Properties] tab.4. Click on the [Services] link.5. Click on the [Network Scanning] link.6. Click on the [Default Template] link.Destination Services7. If you have the Server Fax feature installed, then you will see 2 options:• File• Fax
